Category : Blogs

Sub Category : Miscellaneous

Keeping the lawn green shouldn't frustrate you, and neither should it drain your time or energy in maintenance. Artificial turf installation makes it possible to create a beautiful, pocket-friendly, low-maintenance landscape that stays pretty clean and neat all year round. Working on installation yourself or hiring an expert to do the job; Hence, this would form your major guide-the basics of synthetic grass installation-everything should be very easy to perform and should be of great quality in the end. Here is a simple step-by-step installation guide to supplement your knowledge and help you get as close to a perfect finish as possible.
1. Plan and Measure Your Space
Start with the measurement of the area where you'll put the synthetic grass. This will allow you to purchase the adequate amount of grass and help avoid both shortages and excess. Think about the kind of artificial turf you want to use based on the intended use, shade, and look you want to achieve. Taking the time to plan will make the synthetic grass installation much easier to manage.
2. Prepare the Ground
Good ground preparation is pivotal for a quality artificial turf installation. Begin by eliminating any grass, weeds, rocks, and other debris from the site. Strip and excavate the soil to a depth of 2-4 inches depending on the thickness of the turf and base material. Use a rake or roller to level the surface for a flat and even foundation. Proper preparation eliminates the need for repairs to the level of the surface in the future and assures that your artificial grass will last longer.
3. Install a Base Layer
A stable base is essential for synthetic grass installation. Crushed gravel or decomposed granite should be evenly distributed and raked to achieve a smooth, level surface. Next, the base should be compacted with a tamper or a compactor to a firm base that will support the artificial turf and stop the base from shifting in the future. This step is crucial for the end result to look professionally done. 
4. Lay Down Synthetic Grass
Bend down and drag the grass rolls onto the surface. While laying it, observe and ensure the blades face the direction that offers a natural look. Trim the boning to its required measurement and keep the edges neat so that different cut pieces fit. Attaching different cut sections side by side lets you see if they fit well, and if they do not fit seamlessly, bond them using synthetic grass installation tape and adhesive.

5. Add Infill and Brush 
For added stability and a more natural finish, use infill materials like silica sand or rubber granules and spread them evenly over the surface. Using a shovel, broom, or power brush, work the infill into the grass fibers to keep the blades upright and to add weight, which increases the durability of the grass. Proper infill application is vital for maintaining a natural appearance and the longevity of your synthetic grass installation.

Following these simple steps for artificial turf installation guarantees a gorgeous, low-maintenance lawn that transforms your outdoor space. Whether you’re doing it yourself or hiring professionals, understanding the process makes the project much more manageable and results in a perfect, pristine lawn.