Tips To Pick A Fuel Dispenser Pump Read Count : 76

Category : Blogs

Sub Category : Miscellaneous
There are many different types of commercial fuel dispensers and fuel pumps with a wide range of features. For the uninformed customer, selecting the appropriate specification is challenging.

Commercial fuel dispenser pump can be kept in several ways; while many people now utilize stainless steel, we advise avoiding plastic housings in favor of steel panels and frames because they are strong and appropriate for the majority of non-corrosive environments. Although there is a demand for straightforward cube-shaped pumps, these devices are hardly as durable as commercial, heavy-duty, floor-mountedpumps. In case a gas dispenser will be installed in a marine setting, you might want to upgrade to a pump with internal pipework made of stainless steel for better corrosion protection.

Speed and accuracy
Decision-making is frequently influenced by rate of delivery flow and pumping, but errors are still possible. You should keep in mind that forecourt fuel pumps, which are used to refuel cars, hardly ever pump at speeds greater than 30 liters per minute when choosing the flow rate of a fuel pump.

Accuracy is crucial but frequently disregarded. In line with retail pumps, fuel pumps used for commercial purposes are more accurate. The use of a displacement meter allows for this level of accuracy. Low-cost devices, also known as a flow meter, is frequently only accurate up to 3 percent and suffers from inertia because of how fuel gets measured, which can cause accuracy to vary.

Commercial gasoline pumps
It is critical to take this into account because fuel pumps used commercially frequently interface with various other equipment, like systems implemented for managing fuel. Fortunately, most of these systems can be connected to modern fuel pumps. But double-checking isnecessary.

While most fuel pumps available for commercial use are only capable of pumping diesel and therefore, cannot be used to pump petrol, some models are appropriate for both types of fuel.

Even if a pump is not being used for pumping diesel, in case it is situated on a system that is also pumping petrol, it is highly likely that a pump used for diesel will be required to have additional approval in order to pump petrol.

You can select from a variety of manufacturers and suppliers to find exactly what your gas station needs based on your customers. For many years of dependable service, equipment used for fuel pumping should properly cleaned and maintained according to guidelines as well as be services byqualified service providers.


  • No Comments
Log Out?

Are you sure you want to log out?